Nous sommes en vacances du 26 Décembre au 5 Janvier 2024. Les expéditions seront faites à partir du 9 Janvier 2024.
Immatriculation des bateaux en eaux intérieures en adhésif
Immatriculation des bateaux en eaux intérieures en adhésif
Immatriculation des bateaux en eaux intérieures en adhésif
Immatriculation des bateaux en eaux intérieures en adhésif

Adhesive boat registration in inland waters

€74.40
Tax included

This kit meets all the requirements for identification marks for vessels in inland waters:

2 registrations + 3 boat names or currencies + 2 home ports + 2 tonnage or number of passengers markings + installation instructions.

Durability: 8 years

White

This product is no longer in stock with the selected values, please select smaller values.
loader
Option image
Option image

Please note that the height will be changed from the highest letter to the lowest letter.

per unit
immat eaux inter

Description

Attention: The registration and the name of your boat will be made according to your input.

Quality: Professional

Please note, any “eccentric” customization or one that does not correspond to what is indicated on your navigation map will not be carried out.

TITLE V: EXTERNAL IDENTITY MARKS

Article 21

The exterior markings are carried either directly on the hull, or on boards or plates fixed to the hull or to the superstructures.

The registration or registration number followed by the letter F is carried on both sides of the vessel. The motto of the boat is carried on the back.

For boats over 15 meters in hull length, the letters and numbers that make up the external identity marks are 18 centimeters high, 10 centimeters wide and 2.5 centimeters thick.

For vessels of 15 meters or less in hull length, the letters and numbers that make up the exterior identity marks are 10 centimeters high, 5 centimeters wide and 1 centimeter thick.

Vessels registered or registered before the date of entry into force of this decree remain subject to the provisions formerly in force.

The adhesive used for this type of lettering is a high performance polymer adhesive vinyl, resistant to water, diesel, oils and light acids.

The length will depend on the height of the letters chosen and your registration. For example, for letters 18 cm high (Lettering 18 cm high x 10 cm wide, 1.5 cm line width) the length will be approximately one meter.

The registration policy is: ARIAL

The font of your boat's name is your choice.

The lot consists of:

2 registrations: 1 starboard + 1 port + aft delivered aligned and ready to be installed

NAME OF THE BOAT The lot consists of:

- 3 boat names, delivered aligned and ready to be installed Character height: 20 cm. The length will depend on the name of your boat and the choice of lettering style.

ATTACHMENT PORT The lot consists of: - 2 home port, delivered aligned and ready to be installed - 3 boat name, delivered aligned and ready to be installed Character height: 15 cm. The length will depend on the name of your boat, helvetica bold font

TONNAGE / NUMBER OF PASSENGERS The set consists of: - 2 Kits, delivered aligned and ready to be installed Letter height: 40 mm

Order of 15 October 2009 relating to the conditions for registration, registration and affixing of external identity marks for pleasure boats sailing or stationing on internal waters.