Pochoir pour immatriculation des semi rigides en peinture

Stencil for registration of semi-rigid in painting

€20.40

Tax included

We offer you here a real painter's stencil, the letters are aligned and ready to be painted.

The paint does not come off like an adhesive, if you prefer a less radical solution we have adhesives specially made for semi-rigid PVC, for the hypalon it is the only effective solution.

Kit including: 2 registrations (port and starboard), and installation instructions.

Quantity

This product is no longer in stock with the selected values, please select smaller values.

Registration

Font

Letter height

Width

Please note that the height will be changed from the highest letter to the lowest letter.

Cockpit registration option

Without cockpit registration

per unit

Reference pochoir immat

Description

Another point we offer you a paint in our accessory department, compatible for PVC and also for Hypalon, beware of aerosol paints, very often, they are not compatible for the Hypalon.

All of our selected fonts have line widths equal to or greater than current regulations.

The adhesive used is a high performance polymer adhesive vinyl resistant to sea water, diesel fuel, oils and light acids.

Please note, any “eccentric” customization or one that does not correspond to what is indicated on your navigation map will not be carried out.

Regulations

Motorboats must have this registration number in capital letters on both sides of the hull or superstructure. The dimensions of the markings are free, but a minimum size for each character must be respected according to the length of the boat: - Less than 7 meters: 4 cm high and 1.5 cm wide. Line thickness: 0.5 cm. - Between 7 and 12 meters: 7 cm high and 3 cm wide. Line thickness: 0.8 cm. - More than 12 meters: 12 cm high and 5 cm wide. Line thickness: 1.5 cm. - For VNM (jetski): 4 cm high and 1.5 cm wide. Line thickness: 0.5 cm. The specific case of annexes: They must bear the word AX followed by the identification marks of the carrier vessel. Internal marking: Since June 1, 2009, any newly registered vessel must bear an internal identification mark in the cockpit or near the cockpit. This marking allows navigators in difficulty to give their registration by VHF to the emergency services and to facilitate the identification of wrecks when rescuers board. Made up of the registration number, this mark, with free dimensions, will be compulsory for all boats, whatever their registration date, from January 1, 2012.

Non contractual images